AEI specialises in the design and manufacture of Rigid Stranding Machines suitable for the production of superior quality stranded conductor for low, medium and extra high voltage (EHV) power cables
|For 95 mm2-3000 mm2 Cable
Up to 2000 mm2 in single pass
|1+6+12+18+24+30+36. No of wires: 7 to 128
|630 mm DIN 46397 Standard / Modified
710 mm DIN 46397
800 mm DIN 46397
|Heavy duty fork type Cage structure.
Cages supported on self aligning roller bearings on both ends.
Totally enclosed gear drive to Cages.
|300 RPM / 250 RPM/ 200 RPM
Line Speed 75 m/min.
Auto increase of speed as bobbins empty.
|Motorised bobbin pintles with safety interlock.
Auto regulated pneumatic bobbin braking mechanism, settable at control desk, for uniform strand tension.
Optionally, self-compensating mechanical bobbin brakes. Wire-break detection on each bobbin, displayed at control desk.
|Fast bobbin row loading using hydraulic floor type batch Loaders. Optionally, side trolley Loaders.
|Slanted design steel-cast Double Wheel Capstan with hard surface suitable for heavy compacting loads. 1500 mm dia to 3500 mm dia X 40,000 kg.f pull Alternatively, Single Wheel Capstan / Caterpillar as per application.
|Self traversing Portal Take-Up Stands with diameter compensation tension control Reels up to 4000 mm flange dia X 40,000 kg
|Independent drive to machine elements with electronic synchronisation in case of power failure also. Optionally, line shaft synchronisation.
|Latest AC drives, PLC and Touch Panel control systems using Profibus & Profinet communication. Fault diagnosis, recipe and production reports included. Data feed to Client MIS over Ethernet.
|Diagnostic access of control system by AEI over Internet link